If you are looking for China golden supplier and China good supplier polyken 1600-30ht high temperature pipe wrap tape, good quality and high quality polyken 1600-30ht high temperature pipe wrap tape, please feel free to contact Jining Qiangke Pipe Anticorrosion Materials Co.,Ltd.
Description
The POLYKEN 1600-HT system is designed for the corrosion protection of new and existing pipelines with a maximum
operating temperature of 250 F(121 C). The primer layer is a solvent-based, thermally-activated material formulated for elevated temperature stability. The coating layer consists of a cross-linked polyethylene backing and a cross-linked
elastomeric adhesive capable of maintaining long-term protection at elevated temperature. The POLYKEN 1600 HT has a release
liner to enable proper unwinding of the roll.
System Components
Primer layer #1619 #1600 HT
Percent solids: 20 Thickness: 30 mils(0.762 mm)
Flash point: 7 C (+45 F) Tensile strength: 40 lbs/in(70 N/10 mm)
Elongation: 500%
Product Construction
1600-30HT
Backing 10 mils(0.254 mm)
Adhesive 20 mils (0.508 mm)
Features
Excellent adhesion to pipe and self
Can be applied over a wide temperature range
Good conformability and consistent uniform thickness
Easily applied with no special equipment
Compatible with common pipe coatings
Excellent resistance to cathodic disbonding
Properties
40 lbs/in(70 N/10 mm) |
|
Elongation |
500% |
Peel Adhesion to Primed Pipe |
40 N/cm |
to backing |
17.8N /cm |
Dielectric Strength |
40 KV |
Cathodic Disbandment |
9.5 mm radius |
Impact resistance |
3.2J |
Volume Resistivity |
1.2 x 1015 ohm.cm |
Water Vapor Transmission Rate |
0.06g/M2/24h |
Water Absorption Rate |
< 0.08% |
Serve temperatuere |
-30 to +120 ℃ |